Connect Tech NT960/PCI Instruções de Operação Página 1

SEA M300USERSGUIDEM300 Users GuideRevision date: January 5, 2015 1:52 pm© Copyright 1997-2015. Science Engineering Associates, Inc.WELCOME TO THE M3

M300USERSGUIDE SEAWELCOME9• Capability to write to binary file while playing back data.• Capability to playback data from an open growing file on

M300USERSGUIDE SEAPROJECTMANAGEMENT99Click on Insert.Use the default values. Click Done to finalize the insert of the board.Note: Forafulldes

SEA M300USERSGUIDEPROJECTMANAGEMENT100If you want to see which files are part of the M300 demo project, open a command window and thentype.cd /ch

M300USERSGUIDE SEAPROJECTMANAGEMENT101

SEA M300USERSGUIDEPROJECTMANAGEMENT102

M300USERSGUIDE SEASETUP103SETUPM300 setup information for board entries, acquisition event entries and buffer.GENERALSETTINGSThere are several a

SEA M300USERSGUIDESETUP104This is used for acquisition mode.PB/UDPControls whether or not the board will be used during playback and broadcast.Dat

M300USERSGUIDE SEASETUP105BOARDSETUP1. In the Setup menu, select Board. (Shortcut: Alt + S, B)All the M300 functionally as far as acquiring real

SEA M300USERSGUIDESETUP106modify button.To remove a board, you must first click on the board on the tree. Then you click the remove button.Once yo

M300USERSGUIDE SEASETUP107ModifyAccesses selected board parameters so they can be changed/reviewed. You must first click on theboard name.For a l

SEA M300USERSGUIDESETUP108ACQUISITIONSETUP1. In the Setup menu, select Acquisition. (Shortcut: Alt + S, A)The M300 provides a graphical interface

SEA M300USERSGUIDEWELCOME10REQUIRED• Pentium II or better class processor.• Accelerated Video Card (PCI).• 128MB RAM minimum.• 20MB free hard disk

M300USERSGUIDE SEASETUP109for each acquisition event type. When you use the acquisition setup dialog in the M300, the data sizewill get filled au

SEA M300USERSGUIDESETUP110the acquisition events is set in the buffer setup.UpMoves the selected item up the list by one. This changes the order o

M300USERSGUIDE SEASETUP111change the order of the boards in the project tree.When you click on a acquisition event, you can modify the settings f

SEA M300USERSGUIDESETUP112BUFFERSETUP1. In the Setup menu, select Buffer. (Shortcut: Alt + S, U)The buffer setup dialog allows the user to contro

M300USERSGUIDE SEASETUP113The order of the acquisition events on the tree is the same order in which they will be used foracquisition.For the syn

SEA M300USERSGUIDESETUP114For a system frequency of 100 hz, buffer frequencies of 20 hz and 25 hz are possible.For a system frequency of 160 hz, b

M300USERSGUIDE SEASETUP115asynchronous buffer and the frequency/life for the buffer in hz.If you click on a buffer from the buffer tree, you can

SEA M300USERSGUIDESETUP116BOARDSETUPD IALOGSEach board type in the M300 has unique setup parameters. The next sections contains a snapshot,along

M300USERSGUIDE SEASETUP117PCIDAC "PCIDAC Board" Piraq "Piraq Board" Piraq2 "Piraq2 Board" PMF "PMF Board"

SEA M300USERSGUIDESETUP1181DBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).CommandFor

M300USERSGUIDE SEAWELCOME11ATRIBUTETOTHEMODEL200After years of trusted use the Model 200 Data Acquisition System (M200 DAS) is showing its a

M300USERSGUIDE SEASETUP1191D256BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Comman

SEA M300USERSGUIDESETUP120Done(See “Done” on page 104).Default(See “Default” on page 104).Cancel(See “Cancel” on page 104).

M300USERSGUIDE SEASETUP1212DGREYBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).DMA(S

SEA M300USERSGUIDESETUP1222DMONOBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).DMA(Se

M300USERSGUIDE SEASETUP123AIMMSBOARDAddress(See “Address” on page 103).State(See “State” on page 103).Data(See “Data Bits” on page 104).Stop(

SEA M300USERSGUIDESETUP124ARINC429BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Rece

M300USERSGUIDE SEASETUP125ARINC561BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Don

SEA M300USERSGUIDESETUP126ATDAQ141XBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Ana

M300USERSGUIDE SEASETUP127CAMAC1DBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Slot

SEA M300USERSGUIDESETUP128CAMAC1D256BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Sl

SEA M300USERSGUIDEWELCOME12System card and wrote a program to initialize the card and handle the interrupts. We measuredinterrupt latency and were

M300USERSGUIDE SEASETUP129GainA/D gain selection.Done(See “Done” on page 104).Default(See “Default” on page 104).Cancel(See “Cancel” on page 1

SEA M300USERSGUIDESETUP130CAMACANALOGBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).S

M300USERSGUIDE SEASETUP131CASPBPBOARDAddress(See “Address” on page 103).Port(See “Port” on page 103).State(See “State” on page 103).PB/UDP(Se

SEA M300USERSGUIDESETUP132CASBOARDAddress(See “Address” on page 103).Port(See “Port” on page 103).State(See “State” on page 103).PB/UDP(See “P

M300USERSGUIDE SEASETUP133LaserAttenuationSee probe manual.Done(See “Done” on page 104).Default(See “Default” on page 104).Cancel(See “Cancel”

SEA M300USERSGUIDESETUP134CIPBOARDAddress(See “Address” on page 103).Port(See “Port” on page 103).State(See “State” on page 103).PB/UDP(See “P

M300USERSGUIDE SEASETUP135NValueSee probe manual.DepthofFieldRejectSee probe manual.EndDiodeRejectSee probe manual.UseRealParticleWidthS

SEA M300USERSGUIDESETUP136CIPGSBOARDAddress(See “Address” on page 103).Port(See “Port” on page 103).State(See “State” on page 103).PB/UDP(See

M300USERSGUIDE SEASETUP137TASSourceSee probe manual.MiddleThresholdSee probe manual.DepthofFieldRejectSee probe manual.MaximumThresholdSee

SEA M300USERSGUIDESETUP138CYCTMBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(Se

M300USERSGUIDE SEAWELCOME13• We did away with the command interface. Our users will not have to learn/remember any more M200 commands.• The M200

M300USERSGUIDE SEASETUP139CYDDABOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(S

SEA M300USERSGUIDESETUP140CYDIO24BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Port

M300USERSGUIDE SEASETUP141CYPDISOBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done

SEA M300USERSGUIDESETUP142DT2817BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Port0

M300USERSGUIDE SEASETUP143GPIBPCIIBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Dev

SEA M300USERSGUIDESETUP144GPSBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Data(See

M300USERSGUIDE SEASETUP145NETWORKBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Prot

SEA M300USERSGUIDESETUP146PCIDACBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(S

M300USERSGUIDE SEASETUP147PIRAQBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Memory

SEA M300USERSGUIDESETUP148TimeSeriesSee board manual.DelaySee board manual.TimingModeSee board manual.GatesSee board manual.TimeSeriesGateSee

SEA M300USERSGUIDEWELCOME14• During playback mode the user can write data to M300 binary file.• Capability to playback data from an open growing f

M300USERSGUIDE SEASETUP149PIRAQ2BOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).DSPF

SEA M300USERSGUIDESETUP150SyncSee board manual.TestPulseWidthSee board manual.TestPulseDelaySee board manual.FrequencySee board manual.Timing

M300USERSGUIDE SEASETUP151ClutterFilterSee board manual.TimeSeriesSee board manual.RFTriggerSee board manual.RFSwitchSee board manual.Stagger

SEA M300USERSGUIDESETUP152PMFBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(See

M300USERSGUIDE SEASETUP153RTI802B OARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done

SEA M300USERSGUIDESETUP154SBUSBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(See

M300USERSGUIDE SEASETUP155SEADABOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Done(S

SEA M300USERSGUIDESETUP156SERIALBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).Data(S

M300USERSGUIDE SEASETUP157SERIALPORTBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).D

SEA M300USERSGUIDESETUP158SPPBOARDAddress(See “Address” on page 103).Port(See “Port” on page 103).State(See “State” on page 103).PB/UDP(See “P

M300USERSGUIDE SEAWELCOME15CONTACTINGSEAShould you need to contact SEA for any reason whatsoever, please select the most convenient meansfrom th

M300USERSGUIDE SEASETUP159AverageTransitRejectionSee probe manual.TransitRejectSee probe manual.AverageTransitTimeAcceptSee probe manual.Ch

SEA M300USERSGUIDESETUP160SYSTEMBOARDAddress(See “Address” on page 103).State(See “State” on page 103).PB/UDP(See “PB/UDP” on page 104).IRQCon

M300USERSGUIDE SEASETUP161projects. If some of your acquisition rates are higher, then pick a system frequency that is at least ashigh as the max

SEA M300USERSGUIDEDATADISPLAYS162WINDOWDISPLAYSThe data displays in the M300 are used to convey acquired data in immediate, understandable form.

M300USERSGUIDE SEADATADISPLAYS163Type Description / Display2DG "2D Grey Image (2dg.300)" 2DM "2D Mono Image (2dm.300)" BFA B

SEA M300USERSGUIDEDATADISPLAYS164FlagsWindow render flags allows the user to customize the look and features desired for each window.Most of the

M300USERSGUIDE SEADATADISPLAYS165GENERALSETTINGSThe M300 has a large variety data displays. However, all displays share some common attributesw

SEA M300USERSGUIDEDATADISPLAYS166GridToggleButtonThe grid toggle button, if depressed, will show the grid for the display. Some M300 displays,

M300USERSGUIDE SEADATADISPLAYS167XAXISTABYAXISTABNote: ThepropertiesoptionsforthexAxisandtheyAxistabsareidenticalwith theexcep

SEA M300USERSGUIDEDATADISPLAYS168MinorMinor grid lines are shown with one pixel in the M300 display (light). This controls the spacingbetween min

SEA M300USERSGUIDEGETTINGSTARTED16GETTINGSTARTEDThe following section is provided for users who wish to get up an running quickly. SEA recommend

M300USERSGUIDE SEADATADISPLAYS169TRIGGERTABThe trigger tab shows the primary and secondary trigger properties to use for the window.Note: Ifth

SEA M300USERSGUIDEDATADISPLAYS170FrequencyThe trigger frequency. Most windows use ‘Ignore’.FormulaThe formula to trigger on. Most windows don’t u

M300USERSGUIDE SEADATADISPLAYS171There are times where it’s desirable to lock some features of the M300 from being able to bemodified.For exampl

SEA M300USERSGUIDEDATADISPLAYS172RGBValueDisplays, in numerical form, the Red, Green, and Blue components of the currently selected color.Each c

M300USERSGUIDE SEADATADISPLAYS173PRINTING/CAPTURINGADATADISPLAYAvailablePrintersThis is a drop down menu containing a list of installed prin

SEA M300USERSGUIDEDATADISPLAYS1741. On the display you wish to print. Click on the Print Button in the display control group at thetop of the dis

M300USERSGUIDE SEADATADISPLAYS1752DGREYIMAGE(2DG.300)ParticleImageA reproduction of the shape of the particles that passed through the 2D Gr

SEA M300USERSGUIDEDATADISPLAYS1762. Select the scaling value needed by either selecting a value from the drop down menu, or typing inthe number d

M300USERSGUIDE SEADATADISPLAYS1772DMONOIMAGE(2DM.300)ParticleColorThis number determines which color the Particle image will be displayed in

SEA M300USERSGUIDEDATADISPLAYS178CLOUDGREYSCALEIMAGE(CGS.300)

M300USERSGUIDE SEAGETTINGSTARTED17boot floppy. Don’t use boot directly into photon or probe for video modes at this time. Usedefault settings fo

M300USERSGUIDE SEADATADISPLAYS179CLOUDIMAGEPROBE(CIP.300)

SEA M300USERSGUIDEDATADISPLAYS180FORMULAWATCHAND ALTER(FWA.300)

M300USERSGUIDE SEADATADISPLAYS181HISTOGRAM(HIS.300)SamplingIntervalThe Amount of time between data sampling.CurrentCountThe count in progress

SEA M300USERSGUIDEDATADISPLAYS182HODOGRAPH(HOD.300)AltitudeThis value is the current altitude of the aircraft during the plot at a specific poin

M300USERSGUIDE SEADATADISPLAYS183HIGHSPEEDANALOG(HSA.300)HighSpeedAnalog‐adjustingYlimitsClick on the limits

SEA M300USERSGUIDEDATADISPLAYS184HEIGHTTIMEINDICATOR(HTI.300)IntensityindbzThe amount of energy which is received back at the radar dish is

M300USERSGUIDE SEADATADISPLAYS1852. Click on the point you wish to read.3. Read the height and intensity values from the text boxes.HTI‐Adjust

SEA M300USERSGUIDEDATADISPLAYS186HIGHVOLUMEPARTICLESPECTROMETERIMAGE(HVP.300)TimeBarA visual representation of a time interval.ParticleIma

M300USERSGUIDE SEADATADISPLAYS187AgeLimitThis is the limit, assigned by the user, the M300 will use to determine if an image should beindicated

SEA M300USERSGUIDEDATADISPLAYS188LIST(LST.300)

SEA M300USERSGUIDEGETTINGSTARTED18CHANGINGTHEM300NODENUMBERWhen you install QNX by default we use node 1 for the install. After the install,

M300USERSGUIDE SEADATADISPLAYS189MOVINGAIRMASS(MAM.300)LatitudeThe aircraft’s angular distance north or south of the earth’s equator, measure

SEA M300USERSGUIDEDATADISPLAYS190CourseThe plotted path of the aircraft.ReferenceRingsCan be controlled by the Rings field and provide a referen

M300USERSGUIDE SEADATADISPLAYS191PROBEDISTRIBUTION(PDI.300)

SEA M300USERSGUIDEDATADISPLAYS192POSITION(POS.300)

M300USERSGUIDE SEADATADISPLAYS193PLANPOSITIONINDICATOR(PPI.300)IntensityindbzThe amount of energy which is received back at the radar dish

SEA M300USERSGUIDEDATADISPLAYS194SKEWT(SKT.300)Temp/DewptThe current degree of temperature and the temperature at which dew begins to form.IB/IT

M300USERSGUIDE SEADATADISPLAYS195STRIPCHART(STP.300)ViewSliderControls the width of the data display area.

SEA M300USERSGUIDEDATADISPLAYS196TEXT(TXT.300)Absolute/OffsetPositionToggleToggles between absolute and offset mode to be used when using the

M300USERSGUIDE SEADATADISPLAYS197Text‐MovingTextEntriesNote: Thelock/unlockbuttonmustbesettounlockbeforemakinganychangestothet

SEA M300USERSGUIDEDATADISPLAYS198Text‐CreatingaNewTextEntryNote: Thelock/unlockbuttonmustbesetto unlockbeforemakinganychangesto

M300USERSGUIDE SEAGETTINGSTARTED19GETTINGTHESYSTEMON THENETWORKIt’s important to have a network card that is supported by QNX. You should j

M300USERSGUIDE SEADATADISPLAYS199this is only one text entry, these buttons will have no effect.DoneButtonClick on this button to finalize the

SEA M300USERSGUIDEDATADISPLAYS200Note: Useofthestr ingform a t modifierforanyotherdatatypesotherthanstring typesmayres ul t inun

M300USERSGUIDE SEADATADISPLAYS201XVS.YViewSliderControls the width of the data display area.

SEA M300USERSGUIDESERVICEANDTROUBLESHOOTING202SERVICEANDTROUBLESHOOTINGAlthough unlikely, there may be occasions when the M300 or the underlyi

M300USERSGUIDE SEASERVICEANDTROUBLESHOOTING2038. According to QSSL, the developers of QNX, large amounts of memory allocation (done eitherstati

SEA M300USERSGUIDESERVICEANDTROUBLESHOOTING2045. Run the M300 and store the binary data to a file.6. Using the RawView Utility to check if the A

M300USERSGUIDE SEASERVICEANDTROUBLESHOOTING205On rack mount systems you want to make sure the cards are fully inserted on the PCI/ISA slots.The

SEA M300USERSGUIDEGETTINGSTARTED20described. For instance, to rename the ‘.key.3020’ file after copying from a windows machine, type mv key.3020

M300USERSGUIDE SEAGETTINGSTARTED21Hvps: 0Falcon: 0Spp: 0Caps: 0Piraq: 0INSTALLINGM300SOFTWAREINQNXSYSTEMOnce QNX is setup and is connected

SEA M300USERSGUIDEGETTINGSTARTED22For example, to copy the entire ‘/test’ directory, type at cp -pR //1/test /test at the commandprompt. You shou

M300USERSGUIDE SEAGETTINGSTARTED23/etc/passwdroot::0:0::///:/bin/shaugie:x:101:101:Augie Henriques:/home/augie:/bin/shlyle::102:101:Lyle Lilie:/

SEA M300USERSGUIDEGETTINGSTARTED24#/usr/ucb/route add 225.0.0.0 192.9.200.2/usr/ucb/route add default 192.9.200.40# /usr/bin/syslogd# Note: to a

M300USERSGUIDE SEAGETTINGSTARTED25promo2000 56790/udppromo2000 56790/tcp## POS/AV#pos-display5600/udppos-control5601/tcppos-primary560

SEA M300USERSGUIDEGETTINGSTARTED26Pipe &emu87 &kbd $CON_KBDprefix -A /dev/console=/dev/con1Net &Net.e1000 -d1075 -l1 &#Net.bege10

M300USERSGUIDE SEAGETTINGSTARTED27$ /bin/Fsys -f 2000 -i 4000 -Hdisk500/bin/Fsys.atapi$ /bin/Fsys.atapi/bin/mount$ /bin/mount -p /dev/hd0 /dev/h

SEA M300USERSGUIDEGETTINGSTARTED28It is because of this real-time requirement that some of the special features of modern day GUI arenot availabl

SEA M300USERSGUIDETABLEOFCONTENTSIIITABLEOFCONT ENTSWELCOME TO THE M300Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .

M300USERSGUIDE SEAGETTINGSTARTED29PhotonTaskBarThis is where any running application’s buttons will displayed. For SEA applications, each wind

SEA M300USERSGUIDEGETTINGSTARTED30HELPVIEWERThe Helpviewer will give you all the documentation for the QSSL software install in the system. Thema

M300USERSGUIDE SEAGETTINGSTARTED31area, you will only get the internal part of the window, without the title bar area of the window.SEATABThis

SEA M300USERSGUIDEGETTINGSTARTED32WORKSPACEThe Photon work space is made of nine virtual consoles. Only one console can be visible at a time.The

M300USERSGUIDE SEAGETTINGSTARTED33For those users you are experienced and have a favorite editor, go ahead an use whatever editor youare familia

SEA M300USERSGUIDEGETTINGSTARTED3423. To delete to the end of a line: CTRL + K.24. Use view menu to switch to hex mode when looking at binary dat

M300USERSGUIDE SEAGETTINGSTARTED352. If there were any changes made while the M300 was open, an option to save changes will begiven. Select Yes

SEA M300USERSGUIDEGENERALINFORMATION36GENERALINFORMATIONThe following sections will provide the user with some helpful basic information about u

M300USERSGUIDE SEAGENERALINFORMATION37determines if the image it's part of was booted from disk or from over the network. If the image wasb

SEA M300USERSGUIDEGENERALINFORMATION38Note: IDnumbersarenumbersgiventoeachuseraccountorgroupaccountforidentificationandshouldbeas

M300USERSGUIDE SEATABLEOFCONTENTSIVChanging your Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M300USERSGUIDE SEAGENERALINFORMATION39• SEA configures the M300 systems with no conflicts for IRQ, DMA and Address. The user is allowed to make

SEA M300USERSGUIDEGENERALINFORMATION40to your current file system, type cd / and you will be returned to the root folder of your file system.ALIV

M300USERSGUIDE SEAGENERALINFORMATION41command prompt for a more complete list of features.STARTINGM300ON/FROMANOTHERNODETo start M300 on ano

SEA M300USERSGUIDEGENERALINFORMATION42Login Shell: /bin/shNew Password: Press ENTERRetype New Password: Press ENTER4. Copy all necessary files fr

M300USERSGUIDE SEAGENERALINFORMATION43These protocol used port number (aka sockets) or port names that are defined in the /etc/servicesfiles.TCP

SEA M300USERSGUIDEGENERALINFORMATION443. To begin the UDP services, you must run the ‘netstart’ batch file. This can be done at thecommand prompt

M300USERSGUIDE SEAGENERALINFORMATION45#/etc/nfsstart#Note: to act as a TCP/IP server, uncomment next line/usr/ucb/inetd &5. Run ‘netstart’ i

SEA M300USERSGUIDEGENERALINFORMATION46The best way to test a serial port is to do this with the ‘sertest’ utility. Please see the ‘sertest’ utili

M300USERSGUIDE SEAGENERALINFORMATION47CAPTURE/PRINTINGM300WINDOWSThe M300 system has the capability to print data to a file (bitmap, *.bmp) or

SEA M300USERSGUIDEGENERALINFORMATION481. In a QNX shell type gzip filename where ‘filename’ is the file you wish to compress. Forexample, gzip s

SEA M300USERSGUIDETABLEOFCONTENTSVSetup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M300USERSGUIDE SEAGENERALINFORMATION49FINDFILESThere are times when it’s necessary to look for a certain group of files or a particular file na

SEA M300USERSGUIDEGENERALINFORMATION502. Use the seadrive -qnx to mount the ‘/hd1’ directory, which is the mount point to for the USBdrive.3. Cop

M300USERSGUIDE SEAGENERALINFORMATION51• M300 interfaces directly with BC635PCI/BC637PCI (GPS Mode) interface (IRIG-A, IRIG-B, IEEE 1344 (Modulat

SEA M300USERSGUIDEGENERALINFORMATION52• We can synchronize to NTP server prior to running M300 (using ntpdate). While M300 is running time adjust

M300USERSGUIDE SEAMAINWINDOW53MAINWINDOWANDPROPERTIESThe M300 main interface window is the primary launch point of all M300 operations. BothA

SEA M300USERSGUIDEMAINWINDOW54ProjectNameThe current project name is display last in the M300 title bar. It is separated from the data source by

M300USERSGUIDE SEAMAINWINDOW55CloseWrite1. In the File menu, select Close Write (Shortcut: Alt+F, W).Closes a file being written to.Note: Ther

SEA M300USERSGUIDEMAINWINDOW56All files used by the M300 will be closed. This includes binary raw file, ASCII files, project files, etc.EDITMENU

M300USERSGUIDE SEAMAINWINDOW57PROJECTMENUYou can find detailed information about the projects (See “Project Management” on page 91).New1. In t

SEA M300USERSGUIDEMAINWINDOW58All the M300 functionally as far as acquiring real time data goes through boards. The boards are thebasic entity th

M300USERSGUIDE SEATABLEOFCONTENTSVI2DGrey Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M300USERSGUIDE SEAMAINWINDOW59Selects the previous window in the window list.Next1. In the Window menu, select Next (Shortcut: Alt+W, E).Selects

SEA M300USERSGUIDEMAINWINDOW60UDPUser Datagram Protocol. This will enable the M300 UDP receive mode. When an M300workstation is in either acquisi

M300USERSGUIDE SEAMAINWINDOW61FormulaWatchandAlterThis button brings up a formula watch window. This allows a user to see what is happening w

SEA M300USERSGUIDEMAINWINDOW62CommandTo the right of the ‘>’ command prompt is command drop down box. The user can type anycommands to be exec

M300USERSGUIDE SEAMAINWINDOW63For the most part error messages are bad. The user must track down the source of all error messagesand eliminate t

SEA M300USERSGUIDEMAINWINDOW64STATUSTABThe status tab display information about M300 data size, rates, state, duration, maximum duration,errors

M300USERSGUIDE SEAMAINWINDOW65This is valid only for acquisition and UDP modes.BroadcastThe total column displays how much data is being broadca

SEA M300USERSGUIDEMAINWINDOW66The information for the IRQ and Proxy times are from the counters on the system board. When wedo acquisition using

M300USERSGUIDE SEAMAINWINDOW67be the cause of these problems.Frequency(hz)This is the system frequency. This value is the value the M300 system

SEA M300USERSGUIDEMAINWINDOW68PLAYBACKTABThe playback tab displays some information about data being played back on the M300. Here theuser can c

SEA M300USERSGUIDETABLEOFCONTENTSVIICloud Image Probe (cip.300). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

M300USERSGUIDE SEAMAINWINDOW69FileProgressBarDisplays how far along the file pointer is (in percentage).When the user rewinds, goes to end of

SEA M300USERSGUIDEMAINWINDOW70AlphabeticalOrderThis allows the user to reverse the alphabetical sort order for the windows in the drop down disp

M300USERSGUIDE SEAMAINWINDOW71information entered here is saved in the prj.300 configuration file in the project folderDuring playback the proje

SEA M300USERSGUIDEMAINWINDOW72USAGETABThe Usage Display Tab is a convenient tool to continually monitor critical resources that can effectM300 D

M300USERSGUIDE SEAMAINWINDOW73M300FILEPROPERTIESDIALOGThe M300 file properties dialogs has sections for files, general and print settings.FIL

SEA M300USERSGUIDEMAINWINDOW74When the QNX OS writes to a file, it doesn’t update the directory structure. This is done tomaximize the write spee

M300USERSGUIDE SEAMAINWINDOW75These are files which can be used by many projects. For example, if you have a lookup filerosemt.lup, it can be pl

SEA M300USERSGUIDEMAINWINDOW76directory. This allows the project and picture files to be separate.If you use ‘/’ in the name, this implies a dire

M300USERSGUIDE SEAMAINWINDOW77HistoryCount,File,Project,Window,CommandThis allows the user to change the number of entries for the history

SEA M300USERSGUIDEMAINWINDOW78PRINTTABWindowPrinter/CaptureThe window printer/capture drop down list allows the user to select the printer, bit

M300USERSGUIDE SEAWELCOME7WELCOMETOTHEM300The M300 is a Data Acquisition System based on the QNX 4 OS (real-time, UNIX like, POSIXcertified) f

M300USERSGUIDE SEADATAOPERATIONS79OPERATINGINSTRUCTIONSThe M300 has three distinct operational modes. Acquisition, Playback and UDP are all mod

SEA M300USERSGUIDEDATAOPERATIONS80ACQUIRINGDATATo acquire data with the M300 system is fairly easy.1. Start M300 system (See “How to Start M300”

M300USERSGUIDE SEADATAOPERATIONS811. There are no errors in the error status and no errors in the M300Logger window. Any errors thereand you nee

SEA M300USERSGUIDEDATAOPERATIONS82PLAYBACKDATATo playback data with the M300 system is fairly easy.1. Start M300 system (See “How to Start M300”

M300USERSGUIDE SEADATAOPERATIONS83Once the M300 is running and playing back data you should always see time incrementing on yourdisplay window a

SEA M300USERSGUIDEDATAOPERATIONS842. Start M300 and setup the system for either acquisition mode (See “Acquiring Data” on page 80)or playback mo

M300USERSGUIDE SEADATAOPERATIONS851. Start M300 system (See “How to Start M300” on page 34).2. Load the desired project (See “Open Project” on

SEA M300USERSGUIDEDATAOPERATIONS86For users with multiple systems and large setups sometimes the situation arise where it’s necessary torun multi

M300USERSGUIDE SEADATAOPERATIONS87HOWTOSETUPBROADCASTFORMULTIPLESYSTEMThere are times were UDP broadcast (send) might be required for more

SEA M300USERSGUIDEDATAOPERATIONS88For the second M300 system.Start the M300 and then change the UDP broadcast settings.To change the UDP settings

SEA M300USERSGUIDEWELCOME8QNX operating system to reduce system latency and minimize the effect on real-time applications. Our vision is to provi

M300USERSGUIDE SEADATAOPERATIONS89For the first M300 session.Start the M300 and then change the UDP broadcast settings.To change the UDP setting

SEA M300USERSGUIDEDATAOPERATIONS90For the second M300 session.Start the M300 and then change the UDP broadcast settings.To change the UDP setting

M300USERSGUIDE SEAPROJECTMANAGEMENT91PROJECTMANAGEMENTThis section of the M300 Users Guide provides assistance with setting up and managing M30

SEA M300USERSGUIDEPROJECTMANAGEMENT92NEWPROJECTNote: M300projectscanno tbesavedontotherootdirectory‘/’.Usersmustfirstcreateadirec

M300USERSGUIDE SEAPROJECTMANAGEMENT93OPENPROJECT1. In the Project menu, select Open.(Shortcut: Alt + P, O)2. In the Subdirectory List, select w

SEA M300USERSGUIDEPROJECTMANAGEMENT94SAVINGAS1. In the Project menu, select Save As. (Shortcut: Alt + P, A).2. In the Subdirectory List, select

M300USERSGUIDE SEAPROJECTMANAGEMENT95DELETEPROJECT1. In the Project menu, select Delete. (Shortcut: Alt + P, D)2. In the Subdirectory List, sel

SEA M300USERSGUIDEPROJECTMANAGEMENT96CONFIGUREANEWPROJECTUse the instructions in the (See “New Project” on page 92), to create a new project.

M300USERSGUIDE SEAPROJECTMANAGEMENT97As you can see the demo project has no boards in the board project tree.The default board type is ‘System’,

SEA M300USERSGUIDEPROJECTMANAGEMENT98Exit the M300 and save the demo project. We will see how to add another board to this project next.Start the