Connect Tech JB2 Manual do Utilizador descarregar pdf (Página 11)

Xtreme/104 Opto User Manual

11 www.connecttech.com CTIM-00007 (0.10) 3/21/2012

800-426-8979 | 519-836-1291

Figure 4: Standard Port Address Selection Jumper Setting Examples

Example 1

Example 2

In the following example, the port

address jumper block is set for port

addresses 2A0, 2A8, 2B0, 2B8 (hex)

and status port disabled.

In the following example, the port

address jumper block is set for port

addresses 100, 108, 110, 118 (hex)

and status port 140 (hex) enabled.

JB3

I/O address select

Status port enable (ST)

JB3

I/O address select

Status port enable (ST)

Figure 5: Industry Compatible Port Address Selection Jumper Setting

Examples

Example 1

In the following example, the port address

jumper block is set for port addresses 160,

168, 170, 178 (hex), status port and

Industry Compatible Mode enabled.

I/O Address Sel

Status Port Sel

Industry Compatible Mode

I/O Address Sel

Status Port Sel

Industry Compatible Mode

Jumper H is used to enable Industry Compatible Addressing modes.

Custom Port Addresses

Other port addresses can be available by making changes to the CPLDs found on the

Xtreme/104 Opto adapter. If you require specific port addresses not listed in Table 1,

please contact a Connect Tech Customer Support Specialist for further information.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Sem comentários

Connect Tech JB2 Manual do Utilizador Página 11